rfinnie/OctoPrint-BedCooldown

FR: Set bed temp instead of turn off bed #8

New issue

Closed

opened 2022-09-21 17:08:10 +00:00 by Ghost · 1 comment

Ghost commented

2022-09-21 17:08:10 +00:00

(Migrated from codeberg.org)

Hey, I have a request! Near the end of the print I want to start cooling the bed but it is difficult to get the timing just right for different prints. What would help immensely is the ability to set the bed temp to a lower temp rather than turning off the bed. This way, even if the bed cools down a little early it will still retain enough adhesion.

Hey, I have a request! Near the end of the print I want to start cooling the bed but it is difficult to get the timing just right for different prints. What would help immensely is the ability to set the bed temp to a lower temp rather than turning off the bed. This way, even if the bed cools down a little early it will still retain enough adhesion.

rfinnie commented

2022-10-02 18:59:58 +00:00

(Migrated from codeberg.org)

Implemented in 0.5.0, thank you!

Implemented in 0.5.0, thank you!

Sign in to join this conversation.

No labels

good first issue

No milestone

No project

No assignees

1 participant

Notifications

Due date

The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference

rfinnie/OctoPrint-BedCooldown#8

No description provided.